Titanium Gr2 Coil

Titanium Gr2 Coil

product name: Titanium Gr2 Coil/Gr2 Titanium Coil
Thickness: 0.019"(0.5mm) - 0.315"(8.0mm)
Width: 39.37"(1000mm) - 59.06"(1500mm)
Grade: Grade 2
Standard: ASTM B265
Surface Finish: Cold Rolling/Hot Rolling/Polished/Pickled
MOQ: Whole Coil
note: we can offer private customization.

Product Introduction

 

What`s titanium Gr2 coil?

Titanium Gr2 Coils, also known as ASTM B265 Grade 2 titanium coils, are a common and widely used form of commercially pure titanium. They offer a good balance of strength, corrosion resistance, and formability, making them suitable for various applications, especially in harsh environments and where weight is a factor.

Titanium Gr2 coils are a valuable material due to their strength, corrosion resistance, formability, and biocompatibility. They find applications across various industries, from aerospace and marine to medical and chemical processing.

product-800-520

itanium Gr 2 Plate, Sheet & Coil Chemical Composition

Grade 

Ti 

C

Fe

H

N

O

Al 

V

Ti Grade2

99.2 min 

0.1 max

0.3 max 

0.015 max 

0.03 max 

0.25 max 

–

–

 

Titanium Gr 2 Sheets, Plates & Coils Mechanical Properties

Element 

Density 

Melting Point 

Tensile Strength 

Yield Strength (0.2%Offset)
 

Elongation 

Titanium Gr. 2 

4.5 g/cm3 

1665 °C (3030 °F)

Psi – 49900 , MPa – 344

Psi – 39900 , MPa – 275
 

20 %

 

Gr2 Titanium coil processing production process

 

 

Titanium coil is a kind of high value-added titanium products, widely used in aerospace, chemical, medical and other fields. The processing and production process is complex and requires strict control of process parameters, which are mainly divided into the following steps:
First, we select high purity titanium sponge (more than 99.6%) as raw material, and melt it in vacuum consumable arc furnace (VAR) or cold hearth furnace (EBCHM) to make titanium ingot. Ingot needs ultrasonic flaw detection to check internal defects, to ensure no porosity, inclusions and other problems.

heat that ingot to above the beta transformation point (about 1000-1200 DEG C) for multi-pass hot rolling, and gradually roll to a thick plate of 20-50 mm. During hot rolling, argon protection shall be adopted to prevent oxidation, and pickling (HF+HNO mixed solution) shall be carried out immediately after rolling to remove the surface oxide layer.

 

secondly, carrying out cold rolling forming, annealing the hot rolled plate, carrying out cold rolling, rolling the hot rolled plate in multiple passes by a reversible rolling mill, and controlling the deformation amount of each time to be 10-15% so as to avoid cracking. Intermediate annealing (700-800℃/1-2h) is required to eliminate work hardening, and the final rolling is 0.3-5mm target thickness.

 

Then, the cold-rolled strip is smoothed by tension straightener, and the surface is electropolished or sanded. The key link is bright annealing (650-750℃/vacuum environment) to ensure that the mechanical properties of the material meet the standards (such as TA2 pure titanium tensile strength ≥345MPa).

Finally, cutting and coiling are carried out
Cut the strip longitudinally by disk, and the error is controlled within ±0.1mm. Coiled by constant tension coiler, the inner diameter is usually 510mm or 610mm, and the outer diameter does not exceed 2000 mm. Finally, laser thickness measurement, eddy current flaw detection and other full inspection.

The key step is packaging, storage and transportation. The finished product is wrapped with moisture-proof aluminum foil, protected by argon gas, and covered with shockproof wooden case. Storage environment requires humidity ≤40%, avoid contact with ferrous materials. 

product-626-468

 

Our company

1.Baoji Mingjie Titanium Material Technology Co., Ltd. is a comprehensive enterprise specializing in titanium and titanium alloy processing, production, sales and R & D, covering a wide range of titanium products such as plates, rods, wires, cakes, rings and other titanium products, serving the aerospace, chemical industry, medical care and many other high-end fields.

2.the company has a young and innovative technical production team, and relying on Baoji "China Titanium Valley" industrial cluster advantages, enjoying a unique geographical and scientific research resources.

3.The company has patented technology such as surface leveling device for heat treatment of sheet metal, which optimizes the production process and improves product quality and production efficiency.

4. The company is oriented to user satisfaction, adheres to honest operation, focuses on product quality, pursues brand benefits, and is committed to providing customers with reliable titanium material solutions.

 

Our Certificate

 

product-535-754
product-583-831
product-590-836
product-539-758
product-532-754
product-527-754
product-594-839
product-593-838

Hot Tags: titanium gr2 coil, China titanium gr2 coil manufacturers, suppliers, factory, Gr3 Titanium Foil, Gr2 Titanium Foil, Gr1 Titanium Foil, titanium foil, Gr4 Titanium Foil, pure titanium foil

You Might Also Like

(0/10)

clearall