Gr1 Titanium Sheet
product name:Grade1 Titanium Sheet
Standard: ASME B265
Thickness: 0.019"(0.5mm) - 0.187"(4.75mm)
Width: 39.370"(1000mm) - 78.740"(2000mm)
Length: ≤236.22"(6000mm)
Finish: Annealing State
Surface: Hot Rolling, Cold Rolling, Polished, Pickling
Payment: T/T
Note:We can customize products according to the different needs of customers
Product Introduction
This is our workshop and in-stock inventory
Below is a showcase of our products.
Gr1 titanium sheet belongs to the commercial pure titanium (CP) series of titanium alloys.It is the titanium alloy with the best ductility and the lowest hardness. Its significant advantage lies in its low density, which is not as strong as titanium alloy, but it is very suitable for applications that require lightweight materials.
The material is mainly composed of titanium (Ti), the purity of titanium is more than 99.5%, and is known for its excellent corrosion resistance, excellent formability, good weldability, and biocompatibility. These properties make it an ideal material for deep drawing processes and are widely used in ships, chemical equipment (such as reactors, pipelines, heat exchangers), and medical fields, especially where high ductility is required.
With the increasing application of Gr1 titanium sheets in the global market, especially in the aviation field (e.g., fuselage structure, engine components), high-tech and high-demand industries, its lightweight and non-corrosive properties have been further expanded to the field of electronic products, such as high-end mobile phone cases and laptop cases.
Chemical Composition And Physical Properties
|
Element |
Grade1 Titanium Sheet |
|
Titanium (Ti) |
Balance (≥ 99.5%) |
|
Oxygen (O) |
≤ 0.18% |
|
Carbon (C) |
≤ 0.08% |
|
Iron (Fe) |
≤ 0.20% |
|
Nitrogen (N) |
≤ 0.03% |
|
Hydrogen (H) |
≤ 0.006% |
|
Other Elements Each |
Each ≤ 0.1%, Total ≤ 0.4% |
|
Property |
|
|
Density |
4.51 g/cm³ |
|
Yield Strength |
≥230 MPa (ASTM B 265: 138-310 MPa) |
|
Tensile Strength |
≥240 MPa (ASTM B 265:＞240 MPa) |
|
Elongation |
≥30% (ASTM B 265:＞24%) |
Characteristics and differences between Gr1 and Gr2 titanium sheets
The following is a comparison of these two sheets.
Mechanical properties: Grade 2 titanium plates have better strength than Grade 1, can withstand greater stress, can be formed to meet requirements, have high hardness and strong wear resistance, and are suitable for wear-prone working conditions.
Corrosion resistance: Grade 1 titanium plates have the best corrosion resistance and are suitable for highly corrosive environments; Grade 2 is slightly weaker, but balances corrosion resistance and structural performance and is stable in chloride environments.
Material selection recommendations: Choose Level 1 for complex forming processes; while considering strength and other factors, especially for marine structural applications, Level 2 offers more comprehensive advantages.
Level 1 applications: Used in highly corrosion-resistant chemical equipment, buildings with high surface requirements, and medical devices requiring biocompatibility.
Level 2 applications: Suitable for aerospace, marine engineering, automotive parts and industrial equipment scenarios that require both strength and corrosion resistance.
Machining: Levels 1 and 2 can be machined in a conventional manner. Level 2 requires strong cutting tools and slow speed to prevent tool wear and thermal damage.
Welding process: Level 1 welding is stable and has low risk; Level 2 requires heat control to prevent embrittlement, and standardized operation yields good results.
Molding technology: Level 1 has excellent molding properties and is suitable for complex processes; Level 2 has weak ductility and can be processed efficiently using heating or progressive molding.
Surface treatment: Two levels of titanium plate treatment can improve performance. Level 1 is smooth and excellent, while Level 2 is difficult to treat but can still meet the industrial requirements for wear resistance and corrosion resistance.
The applications of Gr1 titanium sheet
The following are the main application areas of Gr1
Aerospace
Gr1 titanium sheets are used to manufacture aircraft fuselage structural components, engine parts, etc.,with their lightweight, high strength, high temperature resistance, and fatigue resistance.This features can reduce aircraft weight and improve fuel efficiency.
Chemical and petrochemical industries
The titanium sheet has strong stability in chlor-alkali, papermaking, desalination and acidic environments. It is used to manufacture reactor shells, heat exchangers, piping systems and porous transport layers for electrolysis equipment.
Medical and Bioengineering
Meets ASTM F67 medical standards and is used in orthopedic implants, artificial joints, dental implants, etc., possessing advantages such as being non-toxic, non-rejectable, and bio-inert.
Energy and Environmental Protection Technologies
In order to improve electrolysis efficiency,it is used as a porous gas diffusion layer and electrode substrate for PEM water electrolysis to produce hydrogen. It is also used as a fuel cell electrode material or catalyst carrier. It is applied in water treatment to pure water equipment and other fields as well.
Ocean and Naval Engineering
The gr1 titanium sheet is stable to seawater, salt spray and chlorine environments. It is also suitable for seawater desalination plants, ship components and offshore platform structural parts.
Electronics and Precision Manufacturing
Used in electronic device housings, electromagnetic shielding covers, high-fidelity speaker diaphragms (in titanium foil form), and precision components, it features good heat exchange, non-magnetic properties, and strong damping resistance.
Baoji Mingjie titanium material technology Co,.Ltd.
We have 15 years of experience in the titanium production and processing industry, possessing advanced production equipment such as rolling mills, waterjet cutting machines, and sanders. Our main product, titanium plates, meets various standards, including medical, military, and national military standards. We maintain strict quality control and ensure on-time delivery. Please feel free to contact us with any questions or needs regarding titanium products. We are dedicated to serving you. Welcome to visit our website and place orders anytime!
Our Certificate
FAQ
Q:What is your MOQ?
A:The MOQ is 100kg.
Q:Do you provide samples?Is it free or extra?
A:Sure. If the sample that have stock,we can send you free,you only need to pay courier fee,We are happy to provide you with samples, so you can evaluate the quality of our products.Please tell me the sample quantity and model you need and I will arrange to send it to you.
Q: How can you guarantee the products quality?
A:During the manufacturing process,we are strictly accordding to ISO9001 :2015.We can also provide third party test reports if you require.
Q: What certifications do you have?
A:ISO 9001 cert, hird party official testing report, MTC cert, MSDS cert.
Q:Which titanium alloy grade has better corrosion resistance?
A:Grade 1 titanium is the most corrosion-resistant of commercially available pure titanium, making it ideal for extremely corrosive environments.
Q:Are Grade 2 titanium sheets stronger than Grade 1 titanium sheet?
A:Yes, Gr2 titanium sheet has higher tensile and yield strength than Grade 1 ,So it enble itself to be more suitable for load-bearing applications.
Q:Can both grades of titanium sheets be used for medical purposes?
A:Grade 1 titanium materials are often the preferred material for medical implants due to their excellent biocompatibility, but both types of materials can be used depending on the specific application.
Q:Which grade is easier to form and machine?
A:Grade 1 is softer and more ductile, which makes it easier to form and machine than Grade 2.
Q:How does cost impact the choice between Grade 1 and Grade 2?
A:Gr1 titanium plates have high manufacturing costs due to their high purity and excellent corrosion resistance, while Gr2 titanium plates have higher costs due to the difficulty of processing (high strength) and strict process requirements, which are affected by many factors.
Hot Tags: gr1 titanium sheet, China gr1 titanium sheet manufacturers, suppliers, factory, titanium plate forming, titanium sheet 6mm, titanium sheet cutting, titanium sheet for facade cladding, titanium sheet global delivery, titanium sheet sample order
You Might Also Like
Send Inquiry
