High puriyt Gr1 Titanium Bar
Product name: High purity Gr1 titnaium bar
Place of Origin:Baoji Shaanxi China
Density:4.51g/m³
Standard:ASTM B348/ASM F67
Technique:Forging, Machining
Surface:Polished/Bright
Packaging ：Before shipment,carefully inspected then wooden case package
Type Of Shipping：by air/ by ocean /by railway
Certificates: ISO 9001:2015/EN10204 3.1 MTC/EN10204 3.2 MTC
Product Introduction
What's high purity Gr1 titanium bar?
High-purity GR1 titanium bars refers to a bar-shaped material made of titanium metal.and it is a chemical element that is widely used in various applications including aerospace, automotive industry, medical equipment, chemical equipment, etc.ue to its As a chemical equipment due to its lightweight, high strength,and corrosion resistance. This type of titanium rod usually exists in the form of pure titanium or titanium alloy: high-purity GR1 titanium rods are made of high-purity titanium metal, which combines excellent corrosion resistance and good processing properties; Titanium alloy rods are made by alloying titanium with aluminum, vanadium, zinc and other metal elements, aiming to further improve material properties, such as enhanced strength and high temperature resistance.
Our workshop & products
Below is a showcase of our products.
Products Parameters
|
Material |
Pure titanium |
|
Shape |
Titanium Bar, Forging Bar & Wire (Round, Square, Rectangle and Hexagon, etc.) |
|
Length |
Max. 6000mm |
|
Diameter |
8-400mm |
|
Technical |
Hot forging and grinding finish |
|
Surface |
Black, Pickling, Sand-blasting |
|
Grade |
GR1, GR2, GR3,GR4, GR5, GR7, |
|
Processing Standard |
ASTM B348, AMS 4928, AMS 6921, AMS 4975, AMS 4978, AMS 4966, ASTM F67, ASTM F136, ASME SB863, AWS A5.16, etc. |
Chemical Composition of High purity gr1 titanium bar
|
Element |
Symbol |
Maximum Content (%) |
|
Titanium |
Ti |
Balance |
|
Iron |
Fe |
0.20 |
|
Oxygen |
O |
0.18 |
|
Carbon |
C |
0.08 |
|
Nitrogen |
N |
0.03 |
|
Hydrogen |
H |
0.015 |
The extremely low content of gap elements endows the material with excellent formability and weldability. These properties are crucial for cold forming and medical-grade processing.
Mechanical Properties of Gr1 titanium bar
|
Property |
Value (Annealed) |
|
Tensile Strength |
≥ 240 MPa ≥ 240 |
|
Yield Strength (0.2%) |
≥ 170 MPa ≥ 170 |
|
Elongation |
≥ 24% |
|
Hardness (Rockwell B) |
70 – 80 HRB |
|
Modulus of Elasticity |
~105 GPa |
|
Density |
4.51 g/cm³ |
High purity GR1 titanium bars exhibit superior performance in low-load structures and chemical environments. Its excellent elongation enable it suitable for deep drawing and machining of complex shapes.
Physical Properties of Gr1 titanium bar
|
Property |
Value |
|
Melting Point |
~1665°C |
|
Thermal Conductivity |
16.3 W/m·K |
|
Electrical Resistivity |
55 µΩ·cm |
|
Specific Heat Capacity |
523 J/kg·K |
|
Coefficient of Expansion |
8.6 x 10⁻⁶ /°C |
|
Magnetic Behavior |
Non-magnetic |
GR1 Titanium's unique thermal and electrical properties make it an ideal choice for heat-sensitive and magnetically neutral devices
Processing Capabilities of high purity Gr1 titanium bar
Machining: Gr1 titanium bar has excellent machining performance. It not only has good weldability and is suitable for various welding processes, but also exhibits excellent mechanical machining performance, which enable it is easy to saw and grind. At the same time, it possesses superior stamping performance and is capable of being processed into various complex-shaped parts.
Welding: Gr1 titanium bars have good weldability and high joint strength, but the hydrogen content and protective atmosphere must be strictly controlled.
Forming: In short, Gr1 titanium bars have excellent plasticity, and are suitable for both hot and cold forming, and can be processed into complex irregular shapes.
Annealing Range: 650–760°C
Forging Range: 815–900°C
Surface Finishes: Surface treatment: pickling, polishing, grinding, or customizing as required.
Heat Treatability: The Gr1 titanium bars are soft and easy to process in the annealed state, and they have higher strength in the cold-drawn state, and can reach 1100MPa after solution strengthening.
The production process of Titanium bar
Gr1 titanium bar technical requirement
1.The chemical composition of titanium and titanium alloy bars shall comply with the provisions of GB/T 3620.1, and the allowable deviation of chemical composition shall comply with the provisions of GB/T 3620.2 when repeated testing is required.
2.the diameter or side length of the hot processing bar and its allowable deviation should comply with the corresponding provisions.
3.After hot processing, the rod is polished by turning (grinding) and cold rolling, and the allowable deviation of the diameter of the cold-drawn bar should meet the industry regulations.
4.after hot processing, the non-roundness of the rod should not be greater than half of its dimensional tolerance
nd cabinets in recent years, such as bacteriostatic sinks and baby bowls.
FAQ
Q: Can you accept delivery in batches at the same time?
Q: Can you provide shipping?
Q: I want to add my own logo on the purchased products, is that OK?
Q: Do you have any compensation if the goods don't arrive on time?
Q: Do you have any compensation if the goods don't arrive on time?
Q: We will make a sample first, and we will mass produce it if you are sure. If there is any discrepancy in the product, all the losses will be borne by us.
Q: The actual address of your company, whether you can visit the site
Q: Does your company have quality control standards and corresponding management system?
Q: Do you have a patent for your product?
Q: Size of your company, number of production and R&D personnel?
Hot Tags: High puriyt Gr1 Titanium Bar, China High puriyt Gr1 Titanium Bar manufacturers, suppliers, factory, black titanium bars, titanium bar for high temperature applications, custom titanium bar production, titanium bar for industrial use, titanium bar suppliers near me, 10mm titanium bar
You Might Also Like
Send Inquiry
