
Gr9 Titanium Bar
Product Name: Gr9 titanium bar
Place of Origin:Baoji Shaanxi China
Surface:Black surface、glazed surface、Polished surface
Form of supply:Titanium square bar、Titanium round rod、Titanium hexagonal bar
Application:Industry ,aviation,Medical implantation
density: 4.51g/cm³
delivery state:R/Y/M/ST
diameter:φ3-φ280mm length:2000-6000mm
Certification:ISO9001:2015、GJB9001C-2017
Standard: GB/T2965-2007、ASTM F136 、ASTM F67
Product Introduction
Gr9 titanium bar
Gr9 titanium bar is also called TA18 titanium bar.It is a high-performance titanium alloy material, which is widely used in aerospace, automobile manufacturing, medical equipment and chemical equipment and other industries. TA18 titanium alloy has become an irreplaceable material choice in harsh working environments due to its superior overall properties, especially high strength and corrosion resistance. In this paper, the main parameters, properties and application fields of TA18 titanium alloy bar are introduced in detail.
chemical component
TA18 titanium alloy belongs to α-β type titanium alloy, the chemical composition mainly includes titanium (Ti), aluminum (Al), vanadium (V), iron (Fe), oxygen (O) and other elements. Its typical components are as follows:
Titanium (Ti) : margin
Aluminum (Al) : 5.5-6.5%
Vanadium (V) : 3.5-4.5%
Iron (Fe) : ≤0.3%
Oxygen (O) : ≤0.20%
outstanding feature
1.High strength: The tensile strength of TA18 is usually between 900 and 1100 MPa, which can maintain good mechanical properties under high stress.
2.Low density: The density is 4.48 g/cm³, about 60% of steel, which has significant advantages in situations where high strength and lightweight are required.
3.Excellent corrosion resistance: in seawater, acid, alkali and other corrosive environment shows strong corrosion resistance, suitable for chemical equipment, Marine engineering and other fields.
4.Good weldability: TA18 titanium alloy has good weldability, and the joint strength after welding can reach more than 90% of the base metal.
Main parameters of Gr9 titanium bar
They are produced in a variety of specifications and can be customized according to specific application requirements. The following are the specifications and parameters of the common TA18 titanium rod:
1.Diameter range: 6mm-200mm.
2.Length: Usually 1 meter, 2 meters or custom length, up to 6 meters.
3.Tolerance: The diameter tolerance is usually between ±0.1mm - ±0.5mm, according to the standard or customer requirements.
4.Surface treatment: pickling, polishing, turning, surface roughness up to Ra 0.4μm-1.6μm
5.State: Annealing (M), cold working (R), Heat treatment (H)
application area
Due to the excellent comprehensive properties of Gr9 titanium bar, it is widely used in the following fields:
1.Aerospace: Used in the manufacture of aircraft fuselages, engine components and connectors, such as wing structures, landing gear and conduits.
2.Automotive manufacturing: Suspension systems, exhaust pipes, body components for racing and performance cars, providing higher strength and reduced weight.
3.Medical devices: Due to its excellent biocompatibility, TA18 titanium alloys are used in the manufacture of human implants, surgical instruments and artificial joints.
4.Chemical equipment: TA18 titanium alloy is widely used in corrosion resistant equipment, such as heat exchangers, reactors, valves and pipelines.
Hot Tags: gr9 titanium bar, China gr9 titanium bar manufacturers, suppliers, factory, Gr23 Titanium Bar, Ta15 Titanium Bar, Gr9 Titanium Bar, titanium alloy bar, Gr7 Titanium Bar, Gr5 Titanium Alloy Bar
You Might Also Like
Send Inquiry







