
Medical titanium Gr23 Bar
Product name:Medical titanium Gr23 bar
Grade:Gr23
Origin: Baoji, Shaanxi, China
Density: 4.5g/cm3
Diameter : Φ 4-120mm.
Delivery status: M
Surface: polishing / pickling.
Length: 1000- 6000 mm.
Quality system: IS09001-2005, GJB9001C-2017
Standard:ASTM B265 ASTM F136
Specification:Dia4~100mm*(1000~3000)mm
Technique:Hot rolling / Cold rolling
Application: Medical, aerospace & avigation field.
Certificates: ISO 9001:2015/EN10204 3.1 MTC/EN10204 3.2 MTC
Product Introduction
GR23 Medical Titanium Rod" is actually a high-performance titanium alloy material specially used in medical treatment, such as artificial joints, bone plates, pacemaker shells and other implantable devices. This material is compatible with the human body, is particularly strong, and is not easily rejected by the body, so doctors love to use it for implants in surgery. It's very reliable!

Chemical elements
|
element |
Fe |
C |
N |
H |
O |
AL |
V |
Other single |
Other total |
|
minimum |
- |
- |
- |
- |
- |
- |
- |
- |
- |
|
maximum |
0.25 |
0.08 |
0.03 |
0.012 |
0.13 |
5.5-6.5 |
3.5-4.5 |
0.1 |
0.4 |
Mechanical properties
|
Condition |
State |
Tensile Strength R m(MPa) |
Yield Strength Rp0.2(MPa) |
Elongation % |
|
Hot rolled cold rolled sheet 0.3≤t≤25 |
annealed condition (M) |
≥860 |
≥795 |
≥10 |
What's the characteristics of the medical titanium Gr23 bar?
Excellent biocompatibility
It can "coexist peacefully" with human tissues and will not cause rejection or allergies, making it safer to use.
High mechanical strength
It can withstand a certain amount of pressure and weight, ensuring that the implant is firm and reliable and will not easily deform or break.

Highly corrosion resistant
It is not easily corroded in bodily fluids, and can remain stable for a long time after implantation, so there is no need to worry about rusting or damage.
lightweight
Titanium has a low density, so titanium rods are very light, which can reduce the burden on patients and make them move more easily.
What's the differences between ASTMF136 and ASTM F67
ASTM F136
This is the standard for medical titanium Gr23 bar used in medical implants. ASTM F136 requires titanium alloys to meet stringent requirements in terms of chemical composition, mechanical properties, biocompatibility, and other aspects to ensure the safety and reliability of implants in the human body. In general, ASTM F136 is suitable for orthopedic implants, such as bone screws, bone plates, artificial joints, and other medical devices that require a high degree of reliability and biocompatibility.

ASTM F67
This is a more general standard for medical titanium Gr23 bar used in manufacturing various medical devices. Compared to ASTM F136, ASTM F67 has relatively less stringent requirements. It includes basic requirements for the chemical composition and mechanical properties of titanium alloys, but has lower requirements for biocompatibility compared to the ASTM F136 standard. Pure titanium medical rod standards are typically applicable to some medical devices that do not require implantation, such as surgical instruments and dental instruments.

the processing steps of Medical titanium Gr23 bar
Raw material preparation: High-purity titanium alloy material (Ti-6Al-4V ELI) is selected to ensure compliance with medical standards.
Forging: Titanium alloy blocks are processed into bar shapes through hot or cold forging, improving mechanical properties.
Heat Treatment: Annealing or aging treatment to improve strength and toughness.
Cutting and Forming: Using precision cutting tools to cut titanium rods to specific lengths and diameters, and then turning, milling, etc.
Surface Treatment: Improve biocompatibility and corrosion resistance through sandblasting, pickling, anodizing, and other methods.
Inspection and Testing: Conduct dimensional inspections, mechanical property tests, and biocompatibility tests to ensure products meet medical standards.
Packaging: The processed titanium rods are sterilely packaged and prepared for clinical application.
the processing steps of Medical titanium Gr23 bar
Raw material preparation: High-purity titanium alloy material (Ti-6Al-4V ELI) is selected to ensure compliance with medical standards.
Forging:The titanium alloy blocks are processed into bar shapes and then with hot or cold forging, so that improving mechanical properties.
Heat Treatment: that is to improve strength and tough of titanium alloy with the treatment of unealing or aging
Cutting and Forming: Using precision cutting tools to cut titanium rods into specific lengths and diameters, and then turning, milling, etc.
Surface Treatment: Improve biocompatibility and corrosion resistance through sandblasting, pickling, anodizing, and other methods.
Inspection and Testing: Conduct dimensional inspections, mechanical property tests, and biocompatibility tests to ensure products meet medical standards.
Packaging: The processed titanium rods are sterilely packaged and prepared for clinical application.

Applicatons of Medical titanium gr23 bar

Surgical implants
GR23 titanium rod is widely used in the manufacture of artificial joints (such as hip, knee, elbow joints), fracture fixation plates and screws, and artificial vertebral/spinal orthoses,with its biocompatibility, corrosion resistance, high strength and lightweight, which can effectively restore joint function, promote bone healing and support the spine while reducing rejection reactions

Dental field
Implants and crown/bridge support structures made of Gr23 titanium rods can integrate tightly with the alveolar bone, provide stable support, and ensure oral tissue health, making them an ideal choice for restoring missing teeth..

Medical device parts
Gr23 titanium alloy is widely used in medical devices with its lightweight, high strength, corrosion resistance, biocompatibility, and electromagnetic shielding properties .especialy used in surgical instruments, pacemaker housings, and vascular stents, to improve ease of operation and ensure long-term safety.
Hot Tags: Medical titanium Gr23 Bar, China Medical titanium Gr23 Bar manufacturers, suppliers, factory, Gr23 Titanium Bar, Gr7 Titanium Bar, titanium alloy bar, Gr5 Titanium Alloy Bar, Gr9 Titanium Bar, Ta15 Titanium Bar
You Might Also Like
Send Inquiry







