Gr5 Titanium Alloy Wire
Product name: Gr5 titanium alloy wire
Place of origin: Baoji, Shaanxi, China
Application: aviation, aerospace, medical.
Shape: round.
Surface: pickling face, bright face.
Delivery State: annealing(M), thermal state (R)
Diameter: 0.1-6.0mm
Note:We offer custom sizes to suit different customer needs.
Product Introduction
What's the Gr5 titanium alloy wire
Gr5 titanium alloy wire (Ti-6Al-4V) is a high-performance material based on titanium with the addition of 6% aluminum and 4% vanadium. It possesses high strength, lightweight, and excellent corrosion resistance. Its tensile strength exceeds 900 MPa, and its density is only about 4.5 g/cm³, and it is also 45% lighter than steel. The gr5 titanium alloy wire is widely used in aerospace, chemical, and marine engineering to manufacture load-bearing components and corrosion-resistant parts.
This material also exhibits good biocompatibility and low-temperature toughness, which makes it suitable for medical applications such as artificial joints and dental implants, as well as aerospace devices operating in extreme environments. While processing requires specialized techniques, its properties can be adjusted through annealing or cold working to meet the stringent stability and reliability requirements of high-end applications.
Detailed informations of Gr5 Titanium Wire
| Alloy | Gr5/Ti 6al 4v/ Gr5 alloy wire |
| Wire Diameter | Ø0.10 mm – 10.00 mm (0.004" – 0.236") |
| Common AWG | 24 AWG≈0.5mm│18 AWG≈1mm│14 AWG≈1.6mm |
| Tolerance | Ø≤0.50 mm:±0.01 mm 0.50 ＜Ø≤ 1.50 mm:±0.02 mm Ø>1.50 mm:±0.03 mm |
| Condition | Annealed / Cold-Drawn |
| Surface | Bright / Pickled / Polished |
| Coil / Supply Form | D100 / D200 / D300 Coil Straight bars (≤ 3 m) |
| Standards | ASTM B863 / UNS R56400 / AMS 4954 / ISO 5832-3 |
chemical compositions of Gr5 titanium alloy wire
| Element | Weight % |
|---|---|
| Aluminum (Al) | 5.50 – 6.75 |
| Vanadium (V) | 3.50 – 4.50 |
| Oxygen (O) | ≤ 0.20 |
| Nitrogen (N) | ≤ 0.05 ≤0.05 |
| Carbon (C) | ≤ 0.08 ≤0.08 |
| Hydrogen (H) | ≤ 0.012 |
| Iron (Fe) | ≤ 0.40 |
| Titanium (Ti) | Balance (Remaining) |
The applications of Gr5 titanium alloy wire
chemical equipment
Gr5 titanium wire is widely used in the manufacture of key components in chemical equipment operating under harsh corrosive environments due to its high strength, lightweight, and excellent corrosion resistance.
ocean engineering
Gr5 titanium wire is widely used in key structural and connecting components of ships, offshore platforms and deep-sea equipment due to its high strength and resistance to seawater corrosion.
aerospace
Gr5 titanium wire is widely used in spacecraft structural components and key engine parts with its high strength, high temperature resistance and corrosion resistance, which helps to reduce weight and improve performance stability.
medical device field
Gr5 titanium wire is widely used in medical fields such as orthopedic implants, dental implants, and cardiovascular stents due to its high strength, excellent biocompatibility, and corrosion resistance.
Production Process of the Gr5 titanium wire
Ingot Choosing
The selection of Gr5 titanium wire titanium ingots should be Ti-6Al-4V alloy in accordance with GB/T 3620.1, with an oxygen ≤ of 0.20%, hydrogen ≤ 0.015%, uniform and fine grains, no surface defects, and the annealing state by vacuum melting is preferred.
Hot Forging
The production of Gr5 titanium wire requires heating the titanium ingot to 800-900℃ and rolling it through multiple passes to control the precision, ensuring uniform structure and increased strength, thus laying the foundation for subsequent wire drawing.
Saw Cutting
For producing Gr5 titanium wire sawing, carbide band saw blades should be used, with low-speed feed and sufficient cooling to avoid high-temperature hardening, ensuring smooth cuts, stable precision, and reducing tool wear.
Hot Rolling to Round Bars
we cut the steel billet into a round bar through rolling. This process shapes the material while maintaining its mechanical properties.
Peeling
The oxide layer (i.e., black skin) on the surface of the round bars is removed using a stripping machine. This operation ensures a clean surface, facilitating subsequent processing.
Wire Rolling
The peeled round steel bars are rolled into wire. The rolling parameters are adjusted to achieve the desired wire diameter.
Second Skin Removal
Remove any residual oxide layer from the surface of the rolled wire. This ensures the surface cleanliness required for subsequent processes.
Inspection and Grinding
Inspect the surface of the wire for defects. Use a polishing tool to remove defects and ensure a uniform surface.
Multi-Stage Drawing
The wire is drawn through multiple dies to further reduce its diameter. This process improves the surface finish and dimensional accuracy of the wire.
Annealing
A final annealing process is performed to eliminate any internal stress and optimize the mechanical properties of the wire.
Quality inspection and packaging
Conduct a final quality inspection to ensure the wires meet the required specifications. Coil the finished wires for storage and transport.
Our Certificate
Hot Tags: gr5 titanium alloy wire, China gr5 titanium alloy wire manufacturers, suppliers, factory, Gr7 Titanium Tube, Ta15 Titanium Tube, Gr5 Titanium Foil, pure titanium plate, Gr9 Titanium Flange, titanium flange
You Might Also Like
Send Inquiry
