Hot Rolling Titanium Coil
video
Hot Rolling Titanium Coil

Hot Rolling Titanium Coil

Product name: Hot Rolling Titanium Coil
Thickness: 3.0 mm-12.0 mm, in coil.
Width: 1500mm.
Finish: Hot rolling and pickling
Standard: ASTM B265
Note: we also provide private customization

Product Introduction

 

What`s the hot rolling titanium coil?

A hot rolling titanium coil is a titanium sheet or strip that has been processed by hot rolling, a manufacturing process where the titanium is heated above its recrystallization temperature and then passed through rollers to achieve the desired thickness and shape.

Hot rolling titanium coils are mostly in thicker material, our Hot rolling titanium coils are from 3.0mm to 12.0mm and can be used for pipe and some structural parts.

product-800-520

The detailed  introduction of the hot rolling titanium coil:


The Chinese national standard classifies pure titanium materials into three grades-TA1, TA2, and TA3-based on impurity content. As impurity element content gradually increases, strength and hardness gradually improve, while plasticity and toughness correspondingly decrease. The commonly used pure titanium is TA2, which has moderate corrosion resistance and good comprehensive mechanical properties. When higher wear resistance and strength are required, TA3 can be selected. When better formability is required, TA1 can be selected. In the Chinese national standard, TA1, TA2, and TA3 correspond to Gr0, Gr1, and Gr2 in the UNS system, respectively. TA1 and TA2 have good low-temperature toughness and high low-temperature strength and can be used as low-temperature structural materials below -253°C. TA2 is the industrial pure titanium specification in the Chinese national standard with a density of 4.51g/cm³.

 

And the processing method  of the hot rolling titanium coil comprises the following steps: raw material - heating - rolling - annealing - shot blasting - closing - pickling - cold rolling - degreasing - annealing - straightening or leveling - trimming - finished product

 

product-700-462

 

Chemical composition and mechanical properties (GB)

Item

Chemical composition

Tensile properties

Fe

C

N

H

O

Single

Sum

Tensile strength

Yield strength

 

Elongation

Gr1

≤0.20

≤0.08

≤0.03

≤0.015

≤0.10

≤0.10

≤0.40

≥240

140~310

≥30

Gr2

≤0.30

≤0.08

≤0.03

≤0.015

≤0.25

≤0.10

≤0.40

≥400

275~450

≥25

Applications:

Known as "space metal," titanium coils are widely used in aerospace, vehicles, biomedical, shipbuilding, chemical engineering, mechanical part manufacturing, communication equipment, hard alloys, mechanical equipment, electronics, sports equipment, and other fields.
According to the Chinese GB standards, pure titanium materials are classified into three grades based on their impurity content: TA1, TA2, and TA3. As the impurity element content increases, mechanical strength and hardness also increase, while plasticity and toughness decrease accordingly. Commonly used titanium materials are TA2, due to their moderate corrosion resistance and comprehensive mechanical properties. When higher requirements are placed on wear resistance and strength, TA3 can be used. TA1 is suitable for applications requiring better formability. The Chinese GB standards' TA1, TA2, and TA3 correspond to the UNS system's Gr0, Gr1, and Gr2, respectively. TA1 and TA2 have good low-temperature toughness and high/low-temperature strength, making them suitable as structural materials below -253°C. TA2 is the industrial pure titanium in the Chinese GB standards with a density of 4.51 g/cm³.

What`s the Advantages of hot rolling titanium coil?

Energy consumption reduction:
Compared to cold rolling, hot rolling requires lower energy consumption because the material deforms more easily at higher temperatures.
Improved mechanical properties:
Hot rolling can refine the microstructure of titanium, thereby improving its strength, ductility, and toughness.
Defect elimination:
The hot rolling process can help eliminate defects in titanium, such as pores or cracks.
Large cross-section:
Hot rolling is suitable for producing titanium materials with large cross-sections, such as plates and strips.

product-800-520

Hot Tags: hot rolling titanium coil, China hot rolling titanium coil manufacturers, suppliers, factory, titanium alloy foil, Gr5 Titanium Foil

Previous: No Information

You Might Also Like

(0/10)

clearall